Xiaomi 1S power values

Dj Swift

Neuer Rollerplauscher
Registriert
15 September 2021
Beiträge
2
Punkte Reaktionen
0
E-Scooter
Xiaomi 1s
Hello Everyone

I want to create my own firmware from the 2 original values of the motor power in amps (or approximate) of the original firmware of the 1s. I have read in some places 25a and 50a but I wanted to be sure since it mixes with the pro2


If anyone could help me I would appreciate it
 

Anhänge

  • IMG_20210913_001552.jpg
    IMG_20210913_001552.jpg
    117,6 KB · Aufrufe: 7

VooDooShamane

Content-Creator
Registriert
19 August 2021
Beiträge
121
Punkte Reaktionen
383
E-Scooter
Xiaomi Pro 2
Hey there,
And welcome to RollerPlausch. 🖐
So you want to set the vanilla ampere values like they are in the 1s Firmware.
But why?
What is the end goal u want to archive?
Maybe we find a better solution 4 you.
 

Doragonnaito42

Moderator
Crewmitglied
Registriert
20 Juni 2020
Beiträge
1.953
Punkte Reaktionen
1.787
E-Scooter
G30D
Hello Everyone

I want to create my own firmware from the 2 original values of the motor power in amps (or approximate) of the original firmware of the 1s. I have read in some places 25a and 50a but I wanted to be sure since it mixes with the pro2


If anyone could help me I would appreciate it
For default Files, just go to https://files.scooterhacking.org/

The english firmware guide is linked at the start of the cfw-generator...
 
OP
D

Dj Swift

Neuer Rollerplauscher
Registriert
15 September 2021
Beiträge
2
Punkte Reaktionen
0
E-Scooter
Xiaomi 1s
Hola,
Y bienvenido a RollerPlausch. 🖐
Por lo tanto, desea establecer los valores de amperios de vainilla como están en el firmware 1s.
¿Pero por qué?
¿Cuál es el objetivo final que desea archivar?
Quizás encontremos una mejor solución para ti.
Ergänzung: ( )

HHello and thank you for your interest

I want to create my own firmware from the original power values (to save the life of my scooter). I need to know only those 2 values
Ergänzung: ( )

For default Files, just go to https://files.scooterhacking.org/

The english firmware guide is linked at the start of the cfw-generator...
Hello, the problem is that it does not serve me because I would like there to be no KERS, another maximum speed .......
 

VooDooShamane

Content-Creator
Registriert
19 August 2021
Beiträge
121
Punkte Reaktionen
383
E-Scooter
Xiaomi Pro 2
Ergänzung: ( )

HHello and thank you for your interest

I want to create my own firmware from the original power values (to save the life of my scooter). I need to know only those 2 values
Ergänzung: ( )


Hello, the problem is that it does not serve me because I would like there to be no KERS, another maximum speed .......
So you basicly want the original 1s Firmware with no kers and more speed?
You can do that with a VLT Firmware.
I hope online Translation will work for you on this one.

If you have questions to the VLT Firmwares, please ask them over there in the VLT Firmwares Thread.

Regards
VooDooShamane
 
Oben Unten