RP ✔️ MiDu-Flasher 🔌 ST-Link Downgrade & Unbrick

[Jürgen66]

Hilfe! die Downgradeverbindung ist abgebrochen, jetzt ist mein Display tot.... nur noch kurzes aufflackern des Rücklichtes beim einschalten

 

[VooDooShamane]

Hilfe! die Downgradeverbindung ist abgebrochen, jetzt ist mein Display tot.... nur noch kurzes aufflackern des Rücklichtes beim einschalten

Eines noch vorab:
Solltet ihr an einer Stelle Hilfe benötigen und hier um Hilfe gebeten wird, dann muss zu eurem Post der Inhalt der MiDu.log Datei (Resource Ordner) in einem solchen Code SPOILER gepostet werden!

MiDu.log Inhalt hier rein

Bitte versucht auch euer Vorgehen und das Fehlerbild so detailliert wie es nur geht zu beschreiben.
Am besten auch mit Bildern.

Ansonsten erstmal keine Panik.
Das bekommen wir schon wieder hin.

 

[Yandroid]

Dann musst du dein dashboard mittels st link wieder flashen. Ist mir auch passiert, aber nur, wenn das dashboard angeschlossen ist.

 

[Jürgen66]

Code:

Spoiler: MiDu log

MIDUMAIN 13-06-2022_13-17-29 device=Dashboard action=Downgrade scooter=Pro2 chip=N51822x
MIDUMAIN working dir=E:\Juergen\Desktop\MiDu-Flasher_v1.0.4\Resource\
:MIDUDOWN 13-06-2022_13-17-45 "https://files.scooterhacking.org/firmware/pro2/BLE/BLE134.bin" "files\BLE\App\N51822x\Pro2\App.bin"
:MIDUDOWN 13-06-2022_13-18-13 "https://github.com/CamiAlfa/stlink_m365_BLE/raw/master/flashing/bootldr.bin" "files\BLE\Bootloader\Bootloader_1s_Pro2_Mi3.bin"
:MIDUSPOOF 13-06-2022_13-18-41
:MIDUSPOOF 13-06-2022_13-18-41 done, spoofed successfully "files\BLE\App\N51822x\Pro2\AppSpoofed.bin" to 157 at offset=0x3E44
OCDINIT 13-06-2022_13-20-55
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.104447
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-21-17 no Connection, errors=1 speed=1000

OCDINIT 13-06-2022_13-21-23
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083100
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-21-23 no Connection, errors=2 speed=1000

OCDINIT 13-06-2022_13-21-28
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081576
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-21-29 no Connection, errors=3 speed=1000

OCDINIT 13-06-2022_13-21-34
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080051
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-21-34 no Connection, errors=4 speed=1000

OCDINIT 13-06-2022_13-21-40
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083100
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-21-40 no Connection, errors=5 speed=1000

OCDINIT 13-06-2022_13-21-45
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081576
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-21-46 no Connection, errors=6 speed=400

OCDINIT 13-06-2022_13-21-51
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083100
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-21-51 no Connection, errors=7 speed=400

OCDINIT 13-06-2022_13-21-57
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080051
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-21-57 no Connection, errors=8 speed=400

OCDINIT 13-06-2022_13-22-02
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.084625
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-22-03 no Connection, errors=9 speed=400

OCDINIT 13-06-2022_13-22-08
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083100
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-22-09 no Connection, errors=10 speed=400

OCDINIT 13-06-2022_13-22-14
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.084625
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-22-14 no Connection, errors=11 speed=400

OCDINIT 13-06-2022_13-22-19
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080051
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-22-20 no Connection, errors=12 speed=400

OCDINIT 13-06-2022_13-22-25
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-22-26 no Connection, errors=13 speed=400

OCDINIT 13-06-2022_13-22-31
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-22-31 no Connection, errors=14 speed=400

OCDINIT 13-06-2022_13-22-36
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-22-37 no Connection, errors=15 speed=400

OCDINIT 13-06-2022_13-22-42
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-22-43 no Connection, errors=16 speed=400

OCDINIT 13-06-2022_13-22-48
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-22-48 no Connection, errors=17 speed=400

OCDINIT 13-06-2022_13-22-53
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-22-54 no Connection, errors=18 speed=400

OCDINIT 13-06-2022_13-22-59
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.102922
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-23-00 no Connection, errors=19 speed=400

OCDINIT 13-06-2022_13-23-05
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081576
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-23-05 no Connection, errors=20 speed=400

OCDINIT 13-06-2022_13-23-10
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.084625
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-23-11 no Connection, errors=21 speed=100

OCDINIT 13-06-2022_13-23-16
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080051
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-23-17 no Connection, errors=22 speed=100

OCDINIT 13-06-2022_13-23-22
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083100
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-23-22 no Connection, errors=23 speed=100

OCDINIT 13-06-2022_13-23-28
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083100
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-23-28 no Connection, errors=24 speed=100

OCDINIT 13-06-2022_13-23-33
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-23-34 no Connection, errors=25 speed=100

OCDINIT 13-06-2022_13-23-39
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-23-39 no Connection, errors=26 speed=100

OCDINIT 13-06-2022_13-23-44
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-23-45 no Connection, errors=27 speed=100

MIDUMAIN 13-06-2022_13-25-55 device=Dashboard action=Downgrade scooter=Pro2 chip=N51822x
MIDUMAIN working dir=E:\Juergen\Desktop\MiDu-Flasher_v1.0.4\Resource\
:MIDUSPOOF 13-06-2022_13-26-07
:MIDUSPOOF 13-06-2022_13-26-07 done, spoofed successfully "files\BLE\App\N51822x\Pro2\AppSpoofed.bin" to 157 at offset=0x3E44
OCDINIT 13-06-2022_13-27-04
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.104895
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-27-05 no Connection, errors=1 speed=1000

OCDINIT 13-06-2022_13-27-10
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-27-11 no Connection, errors=2 speed=1000

OCDINIT 13-06-2022_13-27-16
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-27-16 no Connection, errors=3 speed=1000

OCDINIT 13-06-2022_13-27-21
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-27-22 no Connection, errors=4 speed=1000

OCDINIT 13-06-2022_13-27-27
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-27-28 no Connection, errors=5 speed=1000

OCDINIT 13-06-2022_13-27-33
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-27-33 no Connection, errors=6 speed=400

OCDINIT 13-06-2022_13-27-38
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-27-39 no Connection, errors=7 speed=400

OCDINIT 13-06-2022_13-27-44
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-27-45 no Connection, errors=8 speed=400

OCDINIT 13-06-2022_13-27-50
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-27-50 no Connection, errors=9 speed=400

OCDINIT 13-06-2022_13-27-55
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-27-56 no Connection, errors=10 speed=400

OCDINIT 13-06-2022_13-28-01
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-02 no Connection, errors=11 speed=400

OCDINIT 13-06-2022_13-28-07
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-07 no Connection, errors=12 speed=400

OCDINIT 13-06-2022_13-28-12
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-13 no Connection, errors=13 speed=400

OCDINIT 13-06-2022_13-28-18
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-19 no Connection, errors=14 speed=400

OCDINIT 13-06-2022_13-28-24
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-24 no Connection, errors=15 speed=400

OCDINIT 13-06-2022_13-28-30
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-30 no Connection, errors=16 speed=400

OCDINIT 13-06-2022_13-28-35
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-36 no Connection, errors=17 speed=400

OCDINIT 13-06-2022_13-28-41
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-41 no Connection, errors=18 speed=400

OCDINIT 13-06-2022_13-28-46
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-47 no Connection, errors=19 speed=400

OCDINIT 13-06-2022_13-28-52
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-53 no Connection, errors=20 speed=400

OCDINIT 13-06-2022_13-28-58
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-28-58 no Connection, errors=21 speed=100

OCDINIT 13-06-2022_13-29-04
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-29-04 no Connection, errors=22 speed=100

MIDUMAIN 13-06-2022_13-31-06 device=Dashboard action=Downgrade scooter=Pro2 chip=N51822x
MIDUMAIN working dir=E:\Juergen\Desktop\MiDu-Flasher_v1.0.4\Resource\
:MIDUSPOOF 13-06-2022_13-31-26
:MIDUSPOOF 13-06-2022_13-31-26 done, spoofed successfully "files\BLE\App\N51822x\Pro2\AppSpoofed.bin" to 157 at offset=0x3E44
OCDINIT 13-06-2022_13-32-38
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.108397
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-32-39 no Connection, errors=1 speed=1000

OCDINIT 13-06-2022_13-32-44
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083969
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-32-45 no Connection, errors=2 speed=1000

OCDINIT 13-06-2022_13-32-50
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.087023
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-32-50 no Connection, errors=3 speed=1000

OCDINIT 13-06-2022_13-32-55
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083969
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-32-56 no Connection, errors=4 speed=1000

OCDINIT 13-06-2022_13-33-01
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-33-02 no Connection, errors=5 speed=1000

OCDINIT 13-06-2022_13-33-07
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.102922
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-33-07 no Connection, errors=6 speed=400

OCDINIT 13-06-2022_13-33-13
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081576
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-33-13 no Connection, errors=7 speed=400

OCDINIT 13-06-2022_13-33-18
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.084625
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-33-19 no Connection, errors=8 speed=400

OCDINIT 13-06-2022_13-33-24
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081576
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-33-24 no Connection, errors=9 speed=400

OCDINIT 13-06-2022_13-33-29
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081576
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-33-30 no Connection, errors=10 speed=400

OCDINIT 13-06-2022_13-33-35
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083100
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-33-36 no Connection, errors=11 speed=400

OCDINIT 13-06-2022_13-33-41
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083100
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-33-41 no Connection, errors=12 speed=400

OCDINIT 13-06-2022_13-33-46
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081576
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-33-47 no Connection, errors=13 speed=400

OCDINIT 13-06-2022_13-33-52
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080051
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-33-53 no Connection, errors=14 speed=400

OCDINIT 13-06-2022_13-33-58
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.084625
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-33-58 no Connection, errors=15 speed=400

OCDINIT 13-06-2022_13-34-04
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_13-34-04 no Connection, errors=16 speed=400

OCDINIT 13-06-2022_13-34-09
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.097905
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-34-10 no Connection, errors=17 speed=400

MIDUMAIN 13-06-2022_13-38-43 device=Dashboard action=Downgrade scooter=Pro2 chip=N51822x
MIDUMAIN working dir=E:\Juergen\Desktop\MiDu-Flasher_v1.0.4\Resource\
:MIDUSPOOF 13-06-2022_13-38-46
:MIDUSPOOF 13-06-2022_13-38-46 done, spoofed successfully "files\BLE\App\N51822x\Pro2\AppSpoofed.bin" to 157 at offset=0x3E44
OCDINIT 13-06-2022_13-39-28
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.078095
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-39-29 no Connection, errors=1 speed=1000

OCDINIT 13-06-2022_13-39-34
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.079619
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-39-35 no Connection, errors=2 speed=1000

OCDINIT 13-06-2022_13-39-40
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-39-40 no Connection, errors=3 speed=1000

OCDINIT 13-06-2022_13-39-46
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081143
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-39-46 no Connection, errors=4 speed=1000

OCDINIT 13-06-2022_13-39-51
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-39-52 no Connection, errors=5 speed=1000

OCDINIT 13-06-2022_13-39-57
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-39-57 no Connection, errors=6 speed=400

OCDINIT 13-06-2022_13-40-02
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.079619
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-40-03 no Connection, errors=7 speed=400

OCDINIT 13-06-2022_13-40-08
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081143
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-40-09 no Connection, errors=8 speed=400

OCDINIT 13-06-2022_13-40-14
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-40-14 no Connection, errors=9 speed=400

OCDINIT 13-06-2022_13-40-20
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.078095
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-40-20 no Connection, errors=10 speed=400

OCDINIT 13-06-2022_13-40-25
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.079619
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-40-26 no Connection, errors=11 speed=400

OCDINIT 13-06-2022_13-40-31
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-40-31 no Connection, errors=12 speed=400

OCDINIT 13-06-2022_13-40-37
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-40-37 no Connection, errors=13 speed=400

OCDINIT 13-06-2022_13-40-42
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-40-43 no Connection, errors=14 speed=400

OCDINIT 13-06-2022_13-40-48
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-40-48 no Connection, errors=15 speed=400

MIDUMAIN 13-06-2022_13-43-55 device=Dashboard action=Downgrade scooter=Pro2 chip=N51822x
MIDUMAIN working dir=E:\Juergen\Desktop\MiDu-Flasher_v1.0.4\Resource\
:MIDUSPOOF 13-06-2022_13-43-58
:MIDUSPOOF 13-06-2022_13-43-58 done, spoofed successfully "files\BLE\App\N51822x\Pro2\AppSpoofed.bin" to 157 at offset=0x3E44
OCDINIT 13-06-2022_13-44-40
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.079619
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-44-41 no Connection, errors=1 speed=1000

OCDINIT 13-06-2022_13-44-46
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.079619
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-44-46 no Connection, errors=2 speed=1000

OCDINIT 13-06-2022_13-44-52
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-44-52 no Connection, errors=3 speed=1000

OCDINIT 13-06-2022_13-44-57
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-44-58 no Connection, errors=4 speed=1000

OCDINIT 13-06-2022_13-45-03
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.078095
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-45-04 no Connection, errors=5 speed=1000

OCDINIT 13-06-2022_13-45-09
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.079619
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-45-09 no Connection, errors=6 speed=400

OCDINIT 13-06-2022_13-45-14
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.079619
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-45-15 no Connection, errors=7 speed=400

OCDINIT 13-06-2022_13-45-20
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.078095
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-45-20 no Connection, errors=8 speed=400

OCDINIT 13-06-2022_13-45-26
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081143
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-45-26 no Connection, errors=9 speed=400

OCDINIT 13-06-2022_13-45-31
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082667
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-45-32 no Connection, errors=10 speed=400

OCDINIT 13-06-2022_13-45-37
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.079619
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-45-37 no Connection, errors=11 speed=400

OCDINIT 13-06-2022_13-45-43
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.103369
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-45-43 no Connection, errors=12 speed=400

OCDINIT 13-06-2022_13-45-49
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-45-49 no Connection, errors=13 speed=400

OCDINIT 13-06-2022_13-45-54
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-45-55 no Connection, errors=14 speed=400

OCDINIT 13-06-2022_13-46-00
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-00 no Connection, errors=15 speed=400

OCDINIT 13-06-2022_13-46-06
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-06 no Connection, errors=16 speed=400

OCDINIT 13-06-2022_13-46-11
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-12 no Connection, errors=17 speed=400

OCDINIT 13-06-2022_13-46-17
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-17 no Connection, errors=18 speed=400

OCDINIT 13-06-2022_13-46-23
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-23 no Connection, errors=19 speed=400

OCDINIT 13-06-2022_13-46-28
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-29 no Connection, errors=20 speed=400

OCDINIT 13-06-2022_13-46-34
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-34 no Connection, errors=21 speed=100

OCDINIT 13-06-2022_13-46-40
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-40 no Connection, errors=22 speed=100

OCDINIT 13-06-2022_13-46-45
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-46 no Connection, errors=23 speed=100

OCDINIT 13-06-2022_13-46-51
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-51 no Connection, errors=24 speed=100

OCDINIT 13-06-2022_13-46-57
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-46-57 no Connection, errors=25 speed=100

OCDINIT 13-06-2022_13-47-02
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-47-03 no Connection, errors=26 speed=100

OCDINIT 13-06-2022_13-47-08
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-47-09 no Connection, errors=27 speed=100

OCDINIT 13-06-2022_13-47-14
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_13-47-14 no Connection, errors=28 speed=100

MIDUMAIN 13-06-2022_14-05-06 device=Dashboard action=Downgrade scooter=Pro2 chip=N51822x
MIDUMAIN working dir=E:\Juergen\Desktop\MiDu-Flasher_v1.0.4\Resource\
:MIDUSPOOF 13-06-2022_14-05-10
:MIDUSPOOF 13-06-2022_14-05-10 done, spoofed successfully "files\BLE\App\N51822x\Pro2\AppSpoofed.bin" to 157 at offset=0x3E44
OCDINIT 13-06-2022_14-05-53
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-05-54 no Connection, errors=1 speed=1000

OCDINIT 13-06-2022_14-05-59
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-00 no Connection, errors=2 speed=1000

OCDINIT 13-06-2022_14-06-05
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-05 no Connection, errors=3 speed=1000

OCDINIT 13-06-2022_14-06-10
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-11 no Connection, errors=4 speed=1000

OCDINIT 13-06-2022_14-06-16
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-17 no Connection, errors=5 speed=1000

OCDINIT 13-06-2022_14-06-22
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-22 no Connection, errors=6 speed=400

OCDINIT 13-06-2022_14-06-27
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-28 no Connection, errors=7 speed=400

OCDINIT 13-06-2022_14-06-33
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.088112
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-34 no Connection, errors=8 speed=400

OCDINIT 13-06-2022_14-06-39
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-39 no Connection, errors=9 speed=400

OCDINIT 13-06-2022_14-06-44
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-45 no Connection, errors=10 speed=400

OCDINIT 13-06-2022_14-06-50
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-51 no Connection, errors=11 speed=400

OCDINIT 13-06-2022_14-06-56
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-06-56 no Connection, errors=12 speed=400

OCDINIT 13-06-2022_14-07-01
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-07-02 no Connection, errors=13 speed=400

OCDINIT 13-06-2022_14-07-07
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-07-08 no Connection, errors=14 speed=400

OCDINIT 13-06-2022_14-07-13
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-07-13 no Connection, errors=15 speed=400

OCDINIT 13-06-2022_14-07-19
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-07-19 no Connection, errors=16 speed=400

OCDINIT 13-06-2022_14-07-24
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-07-25 no Connection, errors=17 speed=400

OCDINIT 13-06-2022_14-07-30
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-07-30 no Connection, errors=18 speed=400

OCDINIT 13-06-2022_14-07-36
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-07-36 no Connection, errors=19 speed=400

OCDINIT 13-06-2022_14-07-41
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-07-42 no Connection, errors=20 speed=400

OCDINIT 13-06-2022_14-07-47
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-07-47 no Connection, errors=21 speed=100

OCDINIT 13-06-2022_14-07-53
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-07-53 no Connection, errors=22 speed=100

OCDINIT 13-06-2022_14-07-58
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_14-07-59 no Connection, errors=23 speed=100

MIDUMAIN 13-06-2022_14-08-14 device=Dashboard action=Downgrade scooter=Pro2 chip=N51822x
MIDUMAIN working dir=E:\Juergen\Desktop\MiDu-Flasher_v1.0.4\Resource\
:MIDUSPOOF 13-06-2022_14-08-15
:MIDUSPOOF 13-06-2022_14-08-15 done, spoofed successfully "files\BLE\App\N51822x\Pro2\AppSpoofed.bin" to 157 at offset=0x3E44
OCDINIT 13-06-2022_14-08-55
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.101398
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-08-55 no Connection, errors=1 speed=1000

OCDINIT 13-06-2022_14-09-01
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081576
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-09-01 no Connection, errors=2 speed=1000

OCDINIT 13-06-2022_14-09-06
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.081576
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-09-07 no Connection, errors=3 speed=1000

OCDINIT 13-06-2022_14-09-12
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.099873
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-09-13 no Connection, errors=4 speed=1000

MIDUMAIN 13-06-2022_14-13-09 device=Dashboard action=Downgrade scooter=Pro2 chip=N51822x
MIDUMAIN working dir=E:\Juergen\Desktop\MiDu-Flasher_v1.0.4\Resource\
:MIDUSPOOF 13-06-2022_14-13-11
:MIDUSPOOF 13-06-2022_14-13-11 done, spoofed successfully "files\BLE\App\N51822x\Pro2\AppSpoofed.bin" to 157 at offset=0x3E44
OCDINIT 13-06-2022_14-13-50
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083100
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-13-51 no Connection, errors=1 speed=1000

OCDINIT 13-06-2022_14-13-56
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080051
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-13-57 no Connection, errors=2 speed=1000

OCDINIT 13-06-2022_14-14-02
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080051
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-14-02 no Connection, errors=3 speed=1000

OCDINIT 13-06-2022_14-14-07
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.084625
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-14-08 no Connection, errors=4 speed=1000

OCDINIT 13-06-2022_14-14-13
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_14-14-14 no Connection, errors=5 speed=1000

OCDINIT 13-06-2022_14-14-19
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Error: open failed


ERROR :OCDINIT 13-06-2022_14-14-19 no Connection, errors=6 speed=400

OCDINIT 13-06-2022_14-14-24
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.103369
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-14-25 no Connection, errors=7 speed=400

OCDINIT 13-06-2022_14-14-30
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-14-31 no Connection, errors=8 speed=400

OCDINIT 13-06-2022_14-14-36
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-14-36 no Connection, errors=9 speed=400

OCDINIT 13-06-2022_14-14-41
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-14-42 no Connection, errors=10 speed=400

OCDINIT 13-06-2022_14-14-47
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-14-48 no Connection, errors=11 speed=400

OCDINIT 13-06-2022_14-14-53
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-14-53 no Connection, errors=12 speed=400

OCDINIT 13-06-2022_14-14-58
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-14-59 no Connection, errors=13 speed=400

OCDINIT 13-06-2022_14-15-04
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-15-05 no Connection, errors=14 speed=400

OCDINIT 13-06-2022_14-15-10
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-15-10 no Connection, errors=15 speed=400

OCDINIT 13-06-2022_14-15-16
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-15-16 no Connection, errors=16 speed=400

MIDUMAIN 13-06-2022_14-20-56 device=Dashboard action=Downgrade scooter=Pro2 chip=N51822x
MIDUMAIN working dir=E:\Juergen\Desktop\MiDu-Flasher_v1.0.4\Resource\
:MIDUSPOOF 13-06-2022_14-21-07
:MIDUSPOOF 13-06-2022_14-21-07 done, spoofed successfully "files\BLE\App\N51822x\Pro2\AppSpoofed.bin" to 157 at offset=0x3E44
OCDINIT 13-06-2022_14-21-47
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-21-48 no Connection, errors=1 speed=1000

OCDINIT 13-06-2022_14-21-53
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-21-54 no Connection, errors=2 speed=1000

OCDINIT 13-06-2022_14-21-59
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-21-59 no Connection, errors=3 speed=1000

OCDINIT 13-06-2022_14-22-04
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-22-05 no Connection, errors=4 speed=1000

OCDINIT 13-06-2022_14-22-10
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-22-11 no Connection, errors=5 speed=1000

OCDINIT 13-06-2022_14-22-16
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-22-16 no Connection, errors=6 speed=400

OCDINIT 13-06-2022_14-22-21
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-22-22 no Connection, errors=7 speed=400

OCDINIT 13-06-2022_14-22-27
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-22-27 no Connection, errors=8 speed=400

OCDINIT 13-06-2022_14-22-33
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-22-33 no Connection, errors=9 speed=400

OCDINIT 13-06-2022_14-22-38
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-22-39 no Connection, errors=10 speed=400

OCDINIT 13-06-2022_14-22-44
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-22-44 no Connection, errors=11 speed=400

OCDINIT 13-06-2022_14-22-50
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-22-50 no Connection, errors=12 speed=400

OCDINIT 13-06-2022_14-22-55
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-22-56 no Connection, errors=13 speed=400

OCDINIT 13-06-2022_14-23-01
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-02 no Connection, errors=14 speed=400

OCDINIT 13-06-2022_14-23-07
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-07 no Connection, errors=15 speed=400

OCDINIT 13-06-2022_14-23-12
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-13 no Connection, errors=16 speed=400

OCDINIT 13-06-2022_14-23-18
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-19 no Connection, errors=17 speed=400

OCDINIT 13-06-2022_14-23-24
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-24 no Connection, errors=18 speed=400

OCDINIT 13-06-2022_14-23-29
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-30 no Connection, errors=19 speed=400

OCDINIT 13-06-2022_14-23-35
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-36 no Connection, errors=20 speed=400

OCDINIT 13-06-2022_14-23-41
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-41 no Connection, errors=21 speed=100

OCDINIT 13-06-2022_14-23-47
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-47 no Connection, errors=22 speed=100

OCDINIT 13-06-2022_14-23-52
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-53 no Connection, errors=23 speed=100

OCDINIT 13-06-2022_14-23-58
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-23-58 no Connection, errors=24 speed=100

OCDINIT 13-06-2022_14-24-04
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-24-04 no Connection, errors=25 speed=100

OCDINIT 13-06-2022_14-24-09
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-24-10 no Connection, errors=26 speed=100

OCDINIT 13-06-2022_14-24-15
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-24-15 no Connection, errors=27 speed=100

OCDINIT 13-06-2022_14-24-21
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-24-21 no Connection, errors=28 speed=100

OCDINIT 13-06-2022_14-24-26
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-24-27 no Connection, errors=29 speed=100

OCDINIT 13-06-2022_14-24-32
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-24-32 no Connection, errors=30 speed=100

OCDINIT 13-06-2022_14-24-38
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-24-38 no Connection, errors=31 speed=100

OCDINIT 13-06-2022_14-24-43
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-24-44 no Connection, errors=32 speed=100

OCDINIT 13-06-2022_14-24-49
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-24-50 no Connection, errors=33 speed=100

OCDINIT 13-06-2022_14-24-55
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-24-55 no Connection, errors=34 speed=100

OCDINIT 13-06-2022_14-25-01
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-01 no Connection, errors=35 speed=100

OCDINIT 13-06-2022_14-25-06
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-07 no Connection, errors=36 speed=100

OCDINIT 13-06-2022_14-25-12
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-12 no Connection, errors=37 speed=100

OCDINIT 13-06-2022_14-25-17
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-18 no Connection, errors=38 speed=100

OCDINIT 13-06-2022_14-25-23
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-24 no Connection, errors=39 speed=100

OCDINIT 13-06-2022_14-25-29
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-29 no Connection, errors=40 speed=100

OCDINIT 13-06-2022_14-25-35
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-35 no Connection, errors=41 speed=100

OCDINIT 13-06-2022_14-25-40
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-41 no Connection, errors=42 speed=100

OCDINIT 13-06-2022_14-25-46
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-46 no Connection, errors=43 speed=100

OCDINIT 13-06-2022_14-25-52
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-52 no Connection, errors=44 speed=100

OCDINIT 13-06-2022_14-25-57
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-25-58 no Connection, errors=45 speed=100

OCDINIT 13-06-2022_14-26-03
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-26-03 no Connection, errors=46 speed=100

OCDINIT 13-06-2022_14-26-09
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-26-09 no Connection, errors=47 speed=100

OCDINIT 13-06-2022_14-26-14
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-26-15 no Connection, errors=48 speed=100

OCDINIT 13-06-2022_14-26-20
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-26-20 no Connection, errors=49 speed=100

OCDINIT 13-06-2022_14-26-26
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-26-26 no Connection, errors=50 speed=100

OCDINIT 13-06-2022_14-26-31
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-26-32 no Connection, errors=51 speed=100

OCDINIT 13-06-2022_14-26-37
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-26-37 no Connection, errors=52 speed=100

OCDINIT 13-06-2022_14-26-43
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-26-43 no Connection, errors=53 speed=100

OCDINIT 13-06-2022_14-26-48
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-26-49 no Connection, errors=54 speed=100

OCDINIT 13-06-2022_14-26-54
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-26-55 no Connection, errors=55 speed=100

OCDINIT 13-06-2022_14-27-00
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-00 no Connection, errors=56 speed=100

OCDINIT 13-06-2022_14-27-06
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-06 no Connection, errors=57 speed=100

OCDINIT 13-06-2022_14-27-11
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-12 no Connection, errors=58 speed=100

OCDINIT 13-06-2022_14-27-17
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-18 no Connection, errors=59 speed=100

OCDINIT 13-06-2022_14-27-23
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-23 no Connection, errors=60 speed=100

OCDINIT 13-06-2022_14-27-28
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-29 no Connection, errors=61 speed=100

OCDINIT 13-06-2022_14-27-34
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-35 no Connection, errors=62 speed=100

OCDINIT 13-06-2022_14-27-40
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-40 no Connection, errors=63 speed=100

OCDINIT 13-06-2022_14-27-46
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-46 no Connection, errors=64 speed=100

OCDINIT 13-06-2022_14-27-51
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-51 no Connection, errors=65 speed=100

OCDINIT 13-06-2022_14-27-57
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-27-57 no Connection, errors=66 speed=100

OCDINIT 13-06-2022_14-28-02
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-28-03 no Connection, errors=67 speed=100

OCDINIT 13-06-2022_14-28-08
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-28-08 no Connection, errors=68 speed=100

OCDINIT 13-06-2022_14-28-14
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-28-14 no Connection, errors=69 speed=100

MIDUMAIN 13-06-2022_14-28-42 device=Dashboard action=Downgrade scooter=Pro2 chip=N51822x
MIDUMAIN working dir=E:\Juergen\Desktop\MiDu-Flasher_v1.0.4\Resource\
:MIDUSPOOF 13-06-2022_14-28-43
:MIDUSPOOF 13-06-2022_14-28-43 done, spoofed successfully "files\BLE\App\N51822x\Pro2\AppSpoofed.bin" to 157 at offset=0x3E44
OCDINIT 13-06-2022_14-29-24
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0x000006d0 msp: 0x000007c0
OCDDUMP 13-06-2022_14-29-25
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
dumped 1024 bytes in 0.031245s (32.005 KiB/s)

OCDINIT 13-06-2022_14-29-26
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0x000006d0 msp: 0x000007c0
OCDDUMP 13-06-2022_14-29-26
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
dumped 1024 bytes in 0.015656s (63.873 KiB/s)

OCDINIT 13-06-2022_14-29-27
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0x000006d0 msp: 0x000007c0
OCDEXPDUMP 13-06-2022_14-29-27
OCDINIT 13-06-2022_14-30-01
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0x000006d0 msp: 0x000007c0
OCDERASE 13-06-2022_14-30-01
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
Error: jtag status contains invalid mode value - communication failure
Polling target nrf51.cpu failed, trying to reexamine
Examination failed, GDB will be halted. Polling again in 100ms
Info : nRF51822-QFAC(build code: A0) 256kB Flash, 32kB RAM
Error: Error waiting NVMC_READY: generic flash write/erase error (check protection etc...)
Error: Failed to erase reg: 0x4001e50c val: 0x00000001
Error: Failed to erase the chip

ERROR :OCDERASE 13-06-2022_14-30-02 no Connection, errors=1 speed=1000

OCDINIT 13-06-2022_14-30-07
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-30-08 no Connection, errors=2 speed=1000

OCDINIT 13-06-2022_14-30-13
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-30-13 no Connection, errors=3 speed=1000

OCDINIT 13-06-2022_14-30-18
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-30-19 no Connection, errors=4 speed=1000

OCDINIT 13-06-2022_14-30-24
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-30-25 no Connection, errors=5 speed=1000

OCDINIT 13-06-2022_14-30-30
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-30-30 no Connection, errors=6 speed=400

OCDINIT 13-06-2022_14-30-35
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0xfffffffe msp: 0xfffffffc
OCDRESET 13-06-2022_14-30-37
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
OCDINIT 13-06-2022_14-30-37
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0xfffffffe msp: 0xfffffffc
OCDWRITE 13-06-2022_14-30-38
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0xfffffffe msp: 0xfffffffc
** Programming Started **
Info : nRF51822-QFAC(build code: A0) 256kB Flash, 32kB RAM
Info : Flash write discontinued at 0x000007c0, next section at 0x00001000
Warn : Adding extra erase range, 0x000007c0 .. 0x000007ff
Error: Flash sector 0 is protected
Error: failed erasing sectors 0 to 1
embedded:startup.tcl:1162: Error: ** Programming Failed **
in procedure 'program'
in procedure 'program_error' called at file "embedded:startup.tcl", line 1227
at file "embedded:startup.tcl", line 1162
ERROR :OCDWRITE 13-06-2022_14-30-39 no Connection, errors=7 speed=400

OCDINIT 13-06-2022_14-30-44
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-30-44 no Connection, errors=8 speed=400

OCDINIT 13-06-2022_14-30-50
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0xfffffffe msp: 0xfffffffc
OCDWRITE 13-06-2022_14-30-51
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDWRITE 13-06-2022_14-30-51 no Connection, errors=9 speed=400

OCDINIT 13-06-2022_14-30-57
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-30-57 no Connection, errors=10 speed=400

OCDINIT 13-06-2022_14-31-02
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-31-03 no Connection, errors=11 speed=400

OCDINIT 13-06-2022_14-31-08
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-31-08 no Connection, errors=12 speed=400

OCDINIT 13-06-2022_14-31-14
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0xfffffffe msp: 0xfffffffc
OCDWRITE 13-06-2022_14-31-15
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0xfffffffe msp: 0xfffffffc
** Programming Started **
Info : nRF51822-QFAC(build code: A0) 256kB Flash, 32kB RAM
Info : Flash write discontinued at 0x000007c0, next section at 0x00001000
Warn : Adding extra erase range, 0x000007c0 .. 0x000007ff
Error: Flash sector 0 is protected
Error: failed erasing sectors 0 to 1
embedded:startup.tcl:1162: Error: ** Programming Failed **
in procedure 'program'
in procedure 'program_error' called at file "embedded:startup.tcl", line 1227
at file "embedded:startup.tcl", line 1162
ERROR :OCDWRITE 13-06-2022_14-31-16 no Connection, errors=13 speed=400

OCDINIT 13-06-2022_14-31-21
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-31-21 no Connection, errors=14 speed=400

OCDINIT 13-06-2022_14-31-27
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-31-27 no Connection, errors=15 speed=400

OCDINIT 13-06-2022_14-31-32
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-31-33 no Connection, errors=16 speed=400

OCDINIT 13-06-2022_14-31-38
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-31-38 no Connection, errors=17 speed=400

OCDINIT 13-06-2022_14-31-44
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-31-44 no Connection, errors=18 speed=400

OCDINIT 13-06-2022_14-31-49
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-31-50 no Connection, errors=19 speed=400

OCDINIT 13-06-2022_14-31-55
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 400 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-31-56 no Connection, errors=20 speed=400

OCDINIT 13-06-2022_14-32-01
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-02 no Connection, errors=21 speed=100

OCDINIT 13-06-2022_14-32-07
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-07 no Connection, errors=22 speed=100

OCDINIT 13-06-2022_14-32-12
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-13 no Connection, errors=23 speed=100

OCDINIT 13-06-2022_14-32-18
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-19 no Connection, errors=24 speed=100

OCDINIT 13-06-2022_14-32-24
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-24 no Connection, errors=25 speed=100

OCDINIT 13-06-2022_14-32-30
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-30 no Connection, errors=26 speed=100

OCDINIT 13-06-2022_14-32-35
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-36 no Connection, errors=27 speed=100

OCDINIT 13-06-2022_14-32-41
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-41 no Connection, errors=28 speed=100

OCDINIT 13-06-2022_14-32-47
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-47 no Connection, errors=29 speed=100

OCDINIT 13-06-2022_14-32-52
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-53 no Connection, errors=30 speed=100

OCDINIT 13-06-2022_14-32-58
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-32-58 no Connection, errors=31 speed=100

OCDINIT 13-06-2022_14-33-03
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-33-04 no Connection, errors=32 speed=100

OCDINIT 13-06-2022_14-33-09
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-33-10 no Connection, errors=33 speed=100

OCDINIT 13-06-2022_14-33-15
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-33-15 no Connection, errors=34 speed=100

OCDINIT 13-06-2022_14-33-21
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-33-21 no Connection, errors=35 speed=100

OCDINIT 13-06-2022_14-33-26
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0xfffffffe msp: 0xfffffffc
OCDWRITE 13-06-2022_14-33-28
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0xfffffffe msp: 0xfffffffc
** Programming Started **
Info : nRF51822-QFAC(build code: A0) 256kB Flash, 32kB RAM
Info : Flash write discontinued at 0x000007c0, next section at 0x00001000
Warn : Adding extra erase range, 0x000007c0 .. 0x000007ff
Error: Flash sector 0 is protected
Error: failed erasing sectors 0 to 1
embedded:startup.tcl:1162: Error: ** Programming Failed **
in procedure 'program'
in procedure 'program_error' called at file "embedded:startup.tcl", line 1227
at file "embedded:startup.tcl", line 1162
ERROR :OCDWRITE 13-06-2022_14-33-29 no Connection, errors=36 speed=100

OCDINIT 13-06-2022_14-33-34
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-33-34 no Connection, errors=37 speed=100

OCDINIT 13-06-2022_14-33-40
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Info : [nrf51.cpu] Cortex-M0 r0p0 processor detected
Info : [nrf51.cpu] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for nrf51.cpu on 3333
Info : Listening on port 3333 for gdb connections
target halted due to debug-request, current mode: Thread
xPSR: 0xc1000000 pc: 0xfffffffe msp: 0xfffffffc
OCDWRITE 13-06-2022_14-33-41
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDWRITE 13-06-2022_14-33-42 no Connection, errors=38 speed=100

OCDINIT 13-06-2022_14-33-47
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-33-48 no Connection, errors=39 speed=100

OCDINIT 13-06-2022_14-33-53
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-33-53 no Connection, errors=40 speed=100

OCDINIT 13-06-2022_14-33-59
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-33-59 no Connection, errors=41 speed=100

OCDINIT 13-06-2022_14-34-04
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-34-05 no Connection, errors=42 speed=100

OCDINIT 13-06-2022_14-34-10
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.080483
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-34-11 no Connection, errors=43 speed=100

OCDINIT 13-06-2022_14-34-16
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-34-16 no Connection, errors=44 speed=100

OCDINIT 13-06-2022_14-34-21
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-34-22 no Connection, errors=45 speed=100

OCDINIT 13-06-2022_14-34-27
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-34-28 no Connection, errors=46 speed=100

OCDINIT 13-06-2022_14-34-33
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-34-33 no Connection, errors=47 speed=100

OCDINIT 13-06-2022_14-34-38
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-34-39 no Connection, errors=48 speed=100

OCDINIT 13-06-2022_14-34-44
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-34-45 no Connection, errors=49 speed=100

OCDINIT 13-06-2022_14-34-50
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-34-50 no Connection, errors=50 speed=100

OCDINIT 13-06-2022_14-34-55
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.083535
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-34-56 no Connection, errors=51 speed=100

OCDINIT 13-06-2022_14-35-01
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-35-02 no Connection, errors=52 speed=100

OCDINIT 13-06-2022_14-35-07
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-35-07 no Connection, errors=53 speed=100

OCDINIT 13-06-2022_14-35-12
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.082009
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-35-13 no Connection, errors=54 speed=100

OCDINIT 13-06-2022_14-35-18
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-35-19 no Connection, errors=55 speed=100

OCDINIT 13-06-2022_14-35-24
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.085060
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-35-24 no Connection, errors=56 speed=100

OCDINIT 13-06-2022_14-35-30
Open On-Chip Debugger 0.11.0+dev-00626-g92c4e634d (2022-03-19-11:44)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : clock speed 100 kHz
Info : STLINK V2J37S7 (API v2) VIDID 0483:3748
Info : Target voltage: 3.086586
Error: init mode failed (unable to connect to the target)


ERROR :OCDINIT 13-06-2022_14-35-30 no Connection, errors=57 speed=100

 

[Jürgen66]

Dann musst du dein dashboard mittels st link wieder flashen. Ist mir auch passiert, aber nur, wenn das dashboard angeschlossen ist.

OK, kann ich denn das Dashboard flashen ohne dass es sich einschalten läßt? Also einfach wie vorher mit dem Midu Flasher?

 

[VooDooShamane]

Zuerst bitte Bilder von deinem Stecker und Dashboard lötpads posten.
Dann schauen wir wie es am besten weitergeht.

 

[Jürgen66]

 

[Yandroid]

OK, kann ich denn das Dashboard flashen ohne dass es sich einschalten läßt? Also einfach wie vorher mit dem Midu Flasher?

Ja klar, ist ja nur nen Software Brick.

 

[VooDooShamane]

Anhang anzeigen 18360

Generell hat Y Yandroid recht.
Aber so wie deine lötpads schon aussehen, würde ich nun löten.
Wer weiß wie viele Versuche die noch aushalten.
Kannst es natürlich auch weiterhin mit dem Stecker probieren, aber dann musst du dich darauf einstellen das du es möglicherweise später schwerer hast mit löten noch etwas zu retten.
Denn wenn diese 3 via Löcher hinüber sind, musst du auf der Rückseite am Chip löten.
Das wird um einiges schwerer. Aber machbar.

Was MiDu-Flasher angeht, solltest du nun die write Flash Option nutzen. Denn dein app_config Bereich ist schon verloren.

 

[Jürgen66]

OK, danke für die Hilfestellungen. Leider habe ich beim Löten kläglich versagt und die Lötpads sehen jetzt so aus. Kann man da noch was retten und gibts hier evtl. Jemanden der das jann , oder sollte das Ding einfach nur noch zum Elektroschrott?

 

[VooDooShamane]

gibts hier evtl. Jemanden der das jann

Biete - ST-Link Downgrade & Unbrick / Hardware Reparatur

Was wird hier angeboten? Folgende dinge können wir für euch erledigen: Dashboard (Downgrade, Unbrick & Hardware Reparatur wie abgerissene/verschmorte Lötpads oder Komponenten) Controller (Downgrade, Unbrick & Hardware Reparatur wie abgerissene/verschmorte Lötpads oder Komponenten) Hier soll es...

rollerplausch.com

Schreib mir einfach eine Private Nachricht.
Dann kümmere ich mich darum.

 

[Olli_69]

Welches Windows?
Win7 ? 32 oder 64 Bit?
Habe festgestellt das win7 eine andere curl benötigt.
Kann hier runtergeladen werden:

https://curl.se/windows/dl-7.83.1_3/curl-7.83.1_3-win32-mingw.zip

VooDooShamane, ich brauche mal deine Hilfe, ich bekomme es unter Win7/32 nicht ans Laufen.

Habe das verlinkte Paket runtergeladen und die curl.exe erst nur im bin-Ordner ausgetauscht, dann auch im ocd-Ordner- es bleibt bei der Fehlermeldung "Error! could not download file"

Zum Schluss noch die libcurl.dll ins windows/system Verzeichnis kopiert, nach Neustart gleiches Ergebnis

 

[VooDooShamane]

Hey Olli_69

Du musst noch die .Cert Datei in das gleiche Verzeichnis legen.
Ist bei dem Download von curl mit bei.

Habe auch schon festgestellt das die in MiDu-Flasher integrierte curl.exe zwar für 32 Bit Systeme ist, aber da sie aus einer win10 Installation stammt, auf meinem Test System mit win7 nicht funktioniert.

Alternativ kann man natürlich immer die Dateien manuell herunterladen.
MiDu-Flasher zeigt die URL und dateipfad wo sie abgelegt werden soll ja an.

LG
VooDoo

 

[Olli_69]

Hey Olli_69

Du musst noch die .Cert Datei in das gleiche Verzeichnis legen.
Ist bei dem Download von curl mit bei.

Welches Verzeichnis, BIN, OCD oder /system?

Hey Olli_69
Alternativ kann man natürlich immer die Dateien manuell herunterladen.
MiDu-Flasher zeigt die URL und dateipfad wo sie abgelegt werden soll ja an.

LG
VooDoo

Aber nur die App.bin, nicht die curl - Dateien . Manuell einfügen geht, ist aber natürlich nicht praktikabel, es soll jla so laufen, wie es vorgesehen ist

 

[VooDooShamane]

Welches Verzeichnis, BIN, OCD oder /system?

Gleiche Verzeichnis wie die curl.exe.

 

[cezarek90]

Hello. Sorry for the language, I'm writing through a translator. The essence of the problem: Ruined his scooter pro 2. At the moment I have: ble 157, drv 969, bms 141. The controller is always red, the scooter cannot be turned off - only by disconnecting the battery. Instead of ID, everything became 000 ... The serial number has also changed (I know the original id and s / n).
I have a brick now? What should I do? scooter the second day only (( Out of ignorance, after custom firmware, I updated through mihom (

 

[email.filtering]

Was ist denn das für eine seltsame Seriennummer? M1GCAxxxxXxxxx Da geht's doch nicht um einen Xiaomi Pro 2, sondern um irgendeinen Ninebot; aber welchen? Ist das ein Modell der F-Serie?

 

[Olli_69]

Was ist denn das für eine seltsame Seriennummer? M1GCAxxxxXxxxx Da geht's doch nicht um einen Xiaomi Pro 2, sondern um irgendeinen Ninebot; aber welchen? Ist das ein Modell der F-Serie?

Hab ich auch schon gedacht, zumal die DRV schon sehr seltsam gespoofed sein muss, passt so überhaupt nicht zu den Xiaomi Versionen

 

[VooDooShamane]

Was ist denn das für eine seltsame Seriennummer? M1GCAxxxxXxxxx

Das ist die Default Serien Nummer die alle Scooter ab Werk bekommen.
Kurz vor verlassen des Werk wird der Sticker + Plakette gedruckt und in die Firmware geschrieben.

At the moment I have: ble 157, drv 969, bms 141.

DRV969 is your Problem.
That's what causing the Issue.
You need to flash a propper DRV Firmware to the controller.

DRV969 ist dein Problem.
Du musst eine korrekte DRV Firmware flashen.

 

[BenniBomber]

Auf welche Version wird das BLE downgegradet, wenn man die Midu Methode anwendet? Von 157 runter auf?